Spatiotemporal changes of landscape pattern in response to deforestation in Northeastern Turkey: a case study in Rize

Recognition and understanding of landscape dynamics as a historical legacy of disturbances are necessary for sustainable management of forest ecosystems. This study analyzes spatial and temporal changes in land use and forest cover patterns in a typical mountain forest area in Rize Forest Enterprise of the Northeastern part of Turkey. The area is investigated by evaluated the temporal changes of spatial structure of forest conditions through spatial analysis of forest cover type maps from 1984 and 2007 using GIS and FRAGSTATS. The quantative evidences presented here showed that there were drastic changes in the temporal and spatial dynamics of land use/forest cover. As an overall change between 1984 and 2007, there was a net decrease of 2.30% in total forested areas. On one hand, productive forest areas decreased 12,506 ha, on the other hand, degraded forest areas increased 14,805 ha. In examining the changes of crown closure and development stages of forest ecosystem during the study period, the forest stand area with medium crown closures increased. Regenerated area increased while the other development stages were left to grow to mature development stages in the period. These results regarding to crown closure and development stage showed that forest quality has increased but total forest areas decreased. This is partially due to out-migration of rural population in Rize and Cayeli towns. In terms of spatial configuration, analysis of the metrics revealed that landscape structure in Study area had changed substantially over the 23-year study period, resulting in fragmentation of the landscape as indicated by the large patch numbers and the smaller mean patch sizes due to heavy timber subtraction, illegal cutting, and uncontrolled stand treatments.     

Susceptibility indexing method for irrigation water management planning: applications to K. Menderes river basin, Turkey

A susceptibility indexing method was developed based on vulnerability and quality indices. The contamination susceptibility index (SI) at a given location was calculated by taking the product of the vulnerability index (VI) and the quality index (QI): SI = VI × QI. This method incorporates both hydrogeological and hydrochemical data for a comprehensive index mapping. The DRASTIC index methodology was used for the hydrogeological data evaluations. The quality index calculation procedure based on a water quality classification scheme was introduced to evaluate hydrochemical data. The suggested susceptibility indexing method was applied to the Küçük Menderes river basin located in western Turkey. The susceptibility index map shows both hydrogeological and hydrochemical data related to the contamination problem including areas that should be taken into consideration during water management planning. The index map indicates that the most susceptible groundwater is located along the river channel between Kiraz and Tire towns, in the Selçuk area and along the Fertek stream channel to the north of Torbal? town. The results indicate that the incorporation of both hydrogeological and hydrochemical datasets enables more realistic evaluations than those of an individual dataset to estimate the groundwater contamination susceptibility of an aquifer. The numerical procedure applied could be extended further by including other parameters such as retardation, potential contaminant sources, etc. that affect the water quality in a given basin.     

Stability of some quality traits in bread wheat (Triticum aestivum) genotypes

This study was carried out in order to determine some quality traits such as thousand grain weight (TGW), hectoliter weight (HW), grain protein content (GPC), Zeleny sedimentation volume (ZSV) and stability of quality traits of 25 bread wheat genotypes. The experiment was conducted at seven environmental conditions during 2 growing periods (2003-2004 and 2004-2005) using randomized complete block design with four replicates. The ANOVA showed that out of the total sum of squares, 48.4, 28.0 and 23.6% for TGW, 71.4, 14.9 and 13.7% for HW, 54.4, 23.0 and 22.6% for GPC, 44.7, 41.7 and 13.6% for ZSV was attributable to E, G and G x E interaction effects, respectively. Thousand grain weight, hectoliter weight, grain protein content and Zeleny sedimentasyon volume of genotypes changed from 34.5 to 41.4 g, from 76.5 to 80.4 Kg, from 11.49 to 13.37% and from 22.1 to 46.0 ml, respectively. Seven stability parameters, covering a wide range of statistical approaches, were used so as to predict the genotypes. The study of genotypic stability showed that Bezostaya and advanced lines numbered 11 and 24 had high stability for quality traits and proved to be the best within the pool of the studied genotypes. Also, 8 and 17 numbered genotypes demonstrated high stability for TGW, HW, GPC and HW, GPC and ZSV, respectively.     

Developing and Implementing Multiple-Use Forest Management Planning in Turkey

This paper explains briefly the conceptual framework of an ecosystem-based multiple-use forest management planning focusing on biodiversity conservation and participation. Some results from a case study were documented to realize the implementation of the concept. A strong liaison between the related institutions and major stakeholders and the effective use of Geographic Information System (GIS) and Remote Sensing (RS) are necessary. Effective participation is evident only with the involvement of enthusiastic and skillful stakeholders. A case study of ??neada, Turkey, supported the idea that participation as communication has better possibilities to promote multiple-use forest management than participation as information gathering. Primary challenges relate to the effectiveness of conservation program, availability of coherent biodiversity data, capacity building; awareness, training, and common understanding of biodiversity and protected area concept; coordination among the related institutions and stakeholders; and willingness and enthusiasm of authorities to accept and implement the concept.     

Classification and mapping forest sites using geographic information system (GIS): a case study in Artvin Province

The productivity of forest sites has been indirectly determined with solo wood production objective in forest management. Forest site productivity should, however, be determined directly in order to implement ecosystem based multipurpose forest management philosophy. This article tackles the problem in distinguishing and mapping forest sites using both direct method and indirect method in Genya Mountain located in central of Artvin State Forest Enterprise. About 112 sample plots were designed and distributed over the area. In each sample plot, soil samples were collected and the classical timber inventory measurements were taken. According to direct method, Soil Moisture Regime (SMR) method is preferred due to a water deficiency in the study area. Water holding capacity was used as an essential criterion for the classification of the forest site. Forest site classifications were assigned regarding the physiographic factors such as landform, aspect, and slope. Five different forest sites classes; dry, moderate fresh, fresh, humid and hygric were determined. According to direct method, the guiding curve was used to generate anamorphic site index (SI) equations and three site index classes; good (SI=I–II), medium (SI=III) and low (SI=IV–V) were determined. Some important differences between the methods were realized. The forest sites determined with site index estimation method indicate that site index I and II is 505.99 ha, III 1095.79 ha and IV and V 992.95 ha, whereas forest sites determined with direct method related to dry site of 937.58 ha, moderate fresh site of 931.90 ha, fresh site of 1,797.71 ha, humid site of 80.48 ha and hygric site of 356.55 ha. The forest site maps of both methods were created using GIS functions. The forest sites of open and degraded areas should be determined according to direct method.     

Spatial and temporal dynamics of land use pattern in Eastern Turkey: a case study in Gümüşhane

Recognition and understanding of landscape dynamics as a historical legacy of disturbances are necessary for sustainable management of forest ecosystems. This study analyzed spatial and temporal changes in land use and land cover patterns in a typical mountain watershed in the Gumushane district along the Northeastern part of Turkey. The area is investigated by comparing LANDSAT images from 1987 to 2000 and evaluated the temporal changes of spatial structure of forest conditions through spatial analysis of forest cover type maps from 1971 and 1987 using GIS and FRAGSTATS™. The results show a general decreasing trend in area of natural land cover types including broadleaf and conifer forests as well as coppice between 1971 and 1987 (0.54%, respectively). In contrast, between 1987 and 2000 this natural land cover types show increasing trend (1.6%). In parallel with forest dynamics, the area of managed land including lowland and upland agricultural areas, rangelands and grasslands increased during the first period and decreased during second period. In terms of spatial configuration, Gümüşhane forests aren’t generally fragmented by intensive forest utilization in the latter periods. This is partially due to out-migration of rural population in Gümüşhane. Nevertheless, land use pattern significantly changed over time depending on a few factors such as unregulated management actions, social pressure and demographic movements. The study revealed that demographic movements have a major effect on landscape dynamics.     

The effects of endosulfan on the great ramshorn snail Planorbarius corneus (Gastropoda, Pulmonata): a histopathological study

In this study the great ramshorn snail (Planorbarius corneus), one of the most abundant gastropod of Turkish limnic systems, was investigated to determine the histopathological effects of endosulfan on the digestive gland, foot and mantle under laboratory conditions. Samples were collected from small artificial pools in Karaot at Gelendost-Isparta (southwest of Turkey), where agricultural activities are widespread. The snails were exposed to two sublethal concentrations of endosulfan (0.4 and 0.8 mg/l) for periods of 10, 20 and 30 days. Fifteen snails were kept in 2.5 l glass jars containing dechlorinated tap water and exposed under semi-static test (daily exchange of test water). All the testing was carried out on adult specimens, and snails were maintained on a photothermal period with 16 light hours at 22 +/- 2 degrees C. The histopathological examinations revealed the following changes: amoebocytes infiltration, dilatation in hemolymphatic spaces between the tubules, degeneration of cells, abnormal lumen, necrosis of cells and atrophy in the connective tissue of digestive gland; desquamation of the epithelium cells, changes in the number of mucocytes and protein gland cells, lipid vacuolus and atrophy of the columnar muscle fibers of the foot and mantle tissues. Pycnotic state of cells was also seen in the mantle tissues. Endosulfan caused significant histopathological alterations in the digestive gland, foot and mantle tissues of the snail, irrespective of concentrations of the pesticide and its exposure periods. The results are discussed, particularly in comparison to those of other aquatic organisms.     

Developing Biocomposites Panels from Food Packaging and Textiles Wastes: Physical and Biological Performance

The urban solid waste problem has been one of the biggest environmental challenges these days. In this context, developing biocomposites with improved performance by using various sources and wastes has been intensified in the last decades for economic and environmental points of view. In this study, physical behavior, fungal decay and termite attack tests were conducted in laboratory conditions to investigate the performance of composites developed from TetraPak and textile wastes. All the results were compared to standard wood products. The water swelling properties strongly decreased in the manufactured TetraPak composites when compared with the conventional particleboard panels. The fungal decay resistance tests revealed that the stand alone TetraPak based composites were not completely resistant to wood-decaying fungi. A significant amelioration in the decay durability was observed for the manufactured TetraPak composites compared to the standard wood samples. Durability classes were determined according to the criteria given in the European standard (CEN/TS15083-1). Interestingly, the data indicated that the increment of the wool waste proportion in the produced boards lead to a significant enhancement counter the test fungi. The results of termite screening test showed further considerable resistance for whole TetraPak based composites against termites when compared to traditional wood samples. Such panels could be an available alternative without any additives for wood based composite structures and it can be used in a wide range of applications.